Kellar E J C: 'Structural use of Adhesives in the Offshore Industry'. 16 March 1999 - presentation given to members of the Institute of Structural Engineers c/o CIRIA (Construction Industry Research and Information Association), 6 Storey's Gate, Westminster, London.

McGrath G C, Jones I A and Troughton M J: 'Production solutions with Plastics'. Joining and Repair of Plastics and Composites', IMechE, 16-17 March 1999.

Taylor A and Fernie J A: 'The thin ceramic line'. Design Engineering, April 1999.

Kellar E J C: 'Adhesive Bonding with Titanium'. Presentation given at TWI to representatives from the titanium industry, 26 May 1999.

Joseph A and Kellar E J C: 'A novel technique for enhancing the ultrasound visibility of medical devices'. 30 June 1999 - presentation at TWI Adhesives Open Day.

Kellar E J C: 'Adhesives - An overview'. Presentation to attendees of Welding Diploma Course held at TWI Training School, 21 October 1999.

Burling P and Thomas G: 'The heat in the sandwich - homegrown fire resistant composite out performs competitors'. TWI Bulletin 2000 41 (1 Jan/Feb).

Thomas G: 'Sticking to the path of good conduct - the future for ECAs'. TWI Bulletin 2000 41 (2 March/April).

Burling P: 'Using Barrikade® - the practical approach'. TWI Bulletin 2000 (July/August) 57-60.

Technical Papers

Kellar E J C: 'AdhFAST ^TM - Adhesive injection fastener'. Connect, no 105, March/April 2000, p.3.

Kellar E J C: 'Innovations in plastic welding and adhesive bonding'. Welding and Metal Fabrication, Vol 68, 10, November/December 2000, pp. 13-15.

Tavakoli S M: 'Adhesive and coatings - the cheaper, greener, higher productivity approaches to rapid curing'. Bulletin, Vol 41, 6, November/December 2000, pp. 83-85.

Tavakoli S M: 'Advances in medicine'. Connect, no 110, January/February 2001, p. 1.

Court R S: 'The long-term durability of adhesive joints'. PhD Thesis, Cambridge University, June 2001.

Tavakoli S M: 'Adhesive and coatings - the cheaper, greener, higher productivity approaches to rapid curing'. Bulletin, Vol 44, 1, January/February 2001, pp. 11-13.

Tavakoli S M: 'Sticking to the healthy option - using adhesive bonding in medical and implantable devices - Part I'. Bulletin, Vol 42, 3, May/June 2001, pp. 35-37.

Tavakoli S M: 'Sticking to the healthy option - using adhesive bonding in medical and implantable devices - Part II'. Bulletin, Vol 42, 4, July/August 2001, pp. 65-68.

Court R S: Ageing of adhesively bonded joints - fracture and failure analysis using video imaging techniques'. Journal of Adhesion and Adhesives, Vol 21, 6, December 2001, pp.455-463.

Rostami S D: 'Rapid Curing by Variable Frequency Microwave'. TWI Bulletin Vol 43, No 4, July/August 2002.

Tavakoli S M: 'Adhesives and sealants in medicine, dentistry and pharmacy - a review of materials and applications - Part 1'. TWI Bulletin January/February 2002.

Tavakoli S M: 'Adhesives and sealants in medicine, dentistry and pharmacy - a review of materials and applications - Part 2'. TWI Bulletin March/April 2002.

Tavakoli S M: 'Adhesive bonding of medical and implantable devices. Medical Device Technology September 2002 13 (7) pp32-6.

Tavakoli S M, Kellar E J C, Nassiri D and Joseph A E: 'A novel polymeric coating for enhanced ultrasound imaging of medical devices'. Journal of Applied Medical Polymers, December 2002.

TWI Members reports

Sinnadurai F N, Rostami S D, Dunkerton S B and Wintle J B: 'Introduction to reliability testing methods in microelectronics and related sectors'. TWI Members Report 7426.02/01/1103.3, September 2001.

Kellar E J C: 'Silane pre-treatment of A1 Alloys for adhesive bonding'. TWI Members Report 77423.1/01/1066.03, November 2001.

Kellar E J C, Manger C I C and Tavakoli S M: 'Fatigue crack growth within adhesively bonded joints'. TWI Members Report 7742.1/01/1032.03, November 2001.

Conferences

Dunkerton S B: 'Joining technologies for medical devices'. Medical Device Technology Conference, 2-3 March 1999, Olympia, London.

Court R S, Sutcliffe M P F and Tavakoli S M: 'Fracture and failure analysis of adhesively bonded joints by video imaging techniques'. Adhesion '99, Cambridge, UK, 15-17 September 1999.

Kellar E J C and Tavakoli S M: 'Fractographic and cross-section analysis of adhesively bonded joints subjected to fatigue loading'. Adhesion '99, Cambridge, UK, 15-17 September 1999.

Kellar E J C, Vlattas C and Tavakoli S M: 'A new refinement to the design and manufacture of tapered double cantilever beams'. Adhesion '99, Cambridge, UK, 15-17 September 1999.

Joseph A E, Kellar E J C, Tavakoli S M and Nassiri D: 'The enhanced visualisation of devices for ultrasound guided interventional procedures'. Annual meeting of the British Ultrasound Society, Glasgow, UK 8-10 December 1999.

McGrath G C: 'Certification and training in the adhesives industry'. Adhesives and Sealants Agenda Europe, 1999, 10-11.

Kellar E J C and Tavakoli S M: 'The development of a novel polymeric coating to improve ultrasound imaging'. 17 February 2000- a presentation to the Medical Device Technology Conference (MDT) at the NEC, Birmingham.

McGrath G C and Froment I D 'Continuous Fiber Reinforced Thermoplastic Composites' Training Conference, Taiwan, 6-10 March 2000.

Kellar E J C: 'The development and potential uses for AdhFAST ^TM technology'. 13 April 2000- a presentation given at the Materials Congress 2000, Cirencester.

Tavakoli S M: 'Laser surface modification of polymers to enhance adhesion - Part II - PEEK, APC-2, LCP and PA66'. ANTEC 2000, 7-11 May 2000, USA, Conference Proceedings, Vol 1, 1248.

Parry G C, Hutchings I M and Taylor A: 'Scratch resistant coatings produced using sol-gel techniques'. International Conference on Organic-Inorganic Hybrids, University of Surrey, 12-14 June 2000.

Taylor A: 'Comparison between sol-gel derived nanocomposites and silicone based hardcoats for the protection of plastics'. International Conference on Organic-Inorganic Hybrids, University of Surrey, 12-14 June 2000.

Taylor A, Parry G C and Hutchings I M: 'Tribological Characterisation of coatings produced using sol-gel techniques'. 4th UK and Ireland Sol-Gel Meeting, Nottingham Trent University, 11-12 September 2000.

Feih S, Shercliff H R and McGrath G C: '3-D progressive damage modelling in adhesive composite peel joints: implements in a UMAT and related computational issues'. ECCM Brighton 2000.

Feih S, Shercliff H R and McGrath G C: '3-D progressive damage modelling for adhesively bonded composite peel joints: implementation in a UMAT and related computational issues'. Conference Proceedings ABAQUS UK User Conference,2000.

Feih S, Shercliff H R and McGrath G C: 'Optimisation of peel joint geometries in CFRP laminates under static loading with regard to first and final failure'. Conference Proceedings ECCM 2000.

Feih S, Shercliff H R and McGrath G C: '3-D Progressive Damage Modelling in Adhesive Composite Peel-Joints: Implementation in a UMAT and Related Computational Issues', ECCM, Brighton 2000.

McGrath G C, Jones I A, Hilton P A, Kellar E J C, Taylor A and Sallavanti R: 'A competitive advantage through innovation'. SAE 2001 World Congress, 5-8 March 2001, Detroit, Michigan, USA.

Chipperfield F A and Dunkerton S B: 'Welding and joining techniques for polymeric medical devices'. Medical Device Technology, May 2001.

Tavakoli S M: 'A novel polymeric coating for enhanced ultrasound imaging of medical devices'. ANTEC 2001, 6-10 May 2001, Dallas. Texas, USA.

Tavakoli S M, Kellar E J C and Vlattas C: 'Mechanical testing and characterisation of a steel adherend bonded using an automotive grade epoxy adhesive'. ANTEC 2001, 6-10 May 2001, Dallas. Texas, USA.

Kellar E J C: 'Quality assurance in bonding technology - innovative approaches for 2001 and beyond'. Swiss Bonding 2001, 22-24 May 2001, Rapperswil, Zurich, Switzerland.

Tavakoli S M and Jones I A: 'Laser processing for welding and enhancing adhesion of polymer surfaces'. Medical Polymers 2001, 14-15 May, Brussels, Belgium.

Buxton A L: 'Innovations at TWI'. Thermoformnet Meeting 'Research and Markets 2001', 19 June 2001, University of Nottingham.

Kellar E J C: 'Innovation combined with injection - Applications in adhesive bonding'. SAE VI, 6 ^th International Conference on Structural Adhesives in Engineering, 4-6 July 2001, Jurys Bristol Hotel, UK, pp. 23 (conference proceedings).

Buxton A L: The influence of a neighbouring fibre on fragmentation test data'. Eighth International Conference on Composites Engineering (ICCE/8), 5-11 August 2001, Tenerife, Canary Islands.

Buxton A L: 'Composites selection: economic solutions to future challenges'. JFNE Seminar 29 November 2001, TWI North.

Court R S, Tavakoli S M and Sutcliffe M P F: 'Predicting Adhesive Joint Life-times'. 25th Annual Meeting of the Adhesion Society and Second World Conference on Adhesion and Related Phenomenon, 10-14 February 2002, Orlando, Florida USA.

Court R S: 'Adhesive Shear Properties - Development of a Simplified Test Specimen'. 6 ^th European Adhesion Conference and Adhesion '02, 10-13 September 2002, Glasgow, UK.

Kellar E J C: 'Hybrid Joining - The Best of Both Worlds'. IMechE Seminar, The Joining of Plastics and Polymer Composite Materials, 24 October 2002.

Robinson P J: 'Flip Chip Equipment for Precision Volume Assembly'. EPPIC Faraday Seminar 'Precision Volume Manufacturing for Photonics and Electronics', 28 May 2002, TWI Ltd, Cambridge, UK.

Corfield V I, Tavakoli S M, Brooks R, Walton C E, Cameron R E and Bonfield W: 'Surface modification of PEEK to enhance biocompatibility'. 17 ^th European Conference on Biomaterials 11-14 September 2002, Spain.

Information and advice from TWI and its partners are provided in good faith and based, where appropriate, on the best engineering knowledge available at the time and incorporated into TWI's website in accordance with TWI's ISO 9001:2000 accredited status. No warranty expressed or implied is given regarding the results or effects of applying information or advice obtained from the website, nor is any responsibility accepted for any consequential loss or damage.

Privacy statement | Copyright Statement

TWI Ltd 2008